Lighthouse has a new layout. Prefer the old one? Return to the old layout, and switch back any time from the link at the top of each page.

Activity (RSS)

Friday, September 30 2011
*** THIS CODE IS STILL NOT STABLE. U... was committed by mcdermj (at xenotropic) at 7:13 AM
Thursday, September 29 2011
***ONCE AGAIN THIS IS AN INITIAL COMM... was committed by mcdermj (at xenotropic) at 9:28 AM
***ONCE AGAIN THIS IS AN INITIAL COMM... was committed by mcdermj (at xenotropic) at 7:48 AM
Wednesday, September 28 2011
More work on remodeling the structure... was committed by mcdermj (at xenotropic) at 6:58 AM
Tuesday, July 26 2011
Initial work for rearrangement of the... was committed by mcdermj (at xenotropic) at 6:22 AM
Wednesday, July 20 2011
32 Preamp Button Setting Doesn't Always Mirror Preamp State was created
  • Robin Davies
    Robin Davies created the ticket at 2:09 PM

    Start by selecting 40m band on main receiver (preamp off). Now select preamp tickbox; premap is enable successfully. Select another band (say 80m) using the ban...
31 Incorrect frequency after pressing band button was created
  • Robin Davies
    Robin Davies created the ticket at 1:54 PM

    Start by pressing the 40m band button on the main receiver. Scroll through the 40m band and into the 41m broadcast band. Now press the 30m band selection button...
Sunday, July 17 2011
30 Automatic Reference Counting (ARC) was created
  • Mike
    Mike created the ticket at 4:11 PM

    IOS 5 will feature ARC.
    Memory management made easy!

    Looking forward to Heterodyne on the iPad!
Friday, July 01 2011
Added UI elements for the auto rangin... was committed by mcdermj (at xenotropic) at 12:08 AM
Thursday, June 30 2011
Initial cut at an auto-ranging waterf... was committed by mcdermj (at xenotropic) at 5:50 PM
Monday, May 16 2011
Release 0.1.0.019 was committed by mcdermj (at xenotropic) at 3:52 PM
Upgraded Metis Firmware was committed by mcdermj (at xenotropic) at 3:39 PM
Monday, April 25 2011
* Added code to re-enable subreceive... was committed by mcdermj (at xenotropic) at 2:44 PM
Wednesday, April 20 2011
* Changed the name of the app delega... was committed by mcdermj (at xenotropic) at 5:11 PM
Tuesday, April 19 2011
* Removed XTDTTSP and replaced it wi... was committed by mcdermj (at xenotropic) at 3:37 PM
Wednesday, April 13 2011
* Merged changes from the 0.1.0 bran... was committed by mcdermj (at xenotropic) at 8:31 AM
*** WARNING *** WARNING *** WARNING *... was committed by mcdermj (at xenotropic) at 7:47 AM
*** WARNING *** WARNING *** WARNING *... was committed by mcdermj (at xenotropic) at 7:42 AM
*** WARNING *** WARNING *** WARNING *... was committed by mcdermj (at xenotropic) at 7:39 AM
Tuesday, April 12 2011
RELEASE-0.1.0.018 was committed by mcdermj (at xenotropic) at 6:30 AM
* Added a command mode firmware prog... was committed by mcdermj (at xenotropic) at 6:29 AM
Sunday, March 27 2011
Test commit to test repository changes. was committed by mcdermj (at xenotropic) at 4:14 AM
* Vending the TransceiverController ... was committed by mcdermj (at xenotropic) at 3:25 AM
* New Icon! was committed by mcdermj (at xenotropic) at 2:12 AM
* Fixed the S-Meter view so that the... was committed by mcdermj (at xenotropic) at 2:11 AM
Saturday, March 19 2011
29 @ synthsize signal in XTSMeterView.m produces ivar error when run in Rel... was updated
  • mcdermj (at xenotropic)
    • State changed from open to resolved
    by mcdermj (at xenotropic) at 6:28 AM

    (from [213]) * Fixed compile error while compiling in release mode. iVars are not auto generated in i386.

    [#29 state:resolved]
  • mcdermj (at xenotropic)
    • State changed from new to open
    • Assigned user set to mcdermj (at xenotropic)
    by mcdermj (at xenotropic) at 6:25 AM
  • w3sz
    w3sz created the ticket at 6:10 AM

    When Heterodyne is run in Release mode [not in Debug mode, where all is OK], the following error is generated:

    /Heterodyne/XTSMeterView.m:14:13: error: synthesi...
* Fixed compile error while compilin... was committed by mcdermj (at xenotropic) at 6:28 AM
Friday, March 18 2011
28 PennyLane Support was created
  • mcdermj (at xenotropic)
    mcdermj (at xenotropic) created the ticket at 6:47 PM

    Need to handle the differences in setting power levels in PennyLane and Pennywhistle. This will require UI changes in Metis Driver and Ozy Driver to set the pro...
* Added a rudimentary new S-Meter. ... was committed by mcdermj (at xenotropic) at 4:14 PM
Wednesday, March 16 2011
* Added code to attempt to start Met... was committed by mcdermj (at xenotropic) at 5:05 AM
26 Click Through on Waterfall, Panadapter, and Bandscope was updated
  • mcdermj (at xenotropic)
    • State changed from open to hold
    by mcdermj (at xenotropic) at 4:40 AM

    The counterargument could be made that if you do want to change the frequency, select the application. To me it's the "least surprise" because there are very fe...
  • JohnJames
    JohnJames commented at 4:31 AM

    You almost had me convinced. Consider the following situation. You are using CocoaModem to listen to a signal and you see a new signal in the waterfall. You wou...
  • mcdermj (at xenotropic)
    mcdermj (at xenotropic) commented at 3:48 AM

    I agree as far as when you have the receiver windows selected, and your point is well taken. But, my understanding of your change from looking at the documentat...
  • JohnJames
    JohnJames commented at 3:42 AM

    I disagree. the whole point of the click thru in this case is to set the frequency conveniently. Now you have to remember if you are focused on the waterfall or...
* Removed the buffers and extra proc... was committed by mcdermj (at xenotropic) at 4:39 AM
* Inserted a DTrace probe for the Me... was committed by mcdermj (at xenotropic) at 3:07 AM
27 Continuous audio gain - feature was updated
  • mcdermj (at xenotropic)
    • State changed from open to resolved
    by mcdermj (at xenotropic) at 2:15 AM

    Changed the "continuous" checkbox in the "Main Menu" xib so that the value continuously updates. This makes it so you can hear the AF gain changes as you move t...
  • mcdermj (at xenotropic)
    mcdermj (at xenotropic) commented at 2:14 AM

    (from [208]) * Changed the AF Gain and Pan buttons to continuous updating so that you can hear what you're doing [#27]
* Changed the AF Gain and Pan button... was committed by mcdermj (at xenotropic) at 2:14 AM
RELEASE-0.1.0.017 was committed by mcdermj (at xenotropic) at 1:32 AM
Release 0.1.0.017 was committed by mcdermj (at xenotropic) at 1:31 AM
* Fixed problem reported by K9SRB th... was committed by mcdermj (at xenotropic) at 1:20 AM
Tuesday, March 15 2011
* Really fix the quitting issues thi... was committed by mcdermj (at xenotropic) at 11:00 PM
27 Continuous audio gain - feature was updated
  • mcdermj (at xenotropic)
    • State changed from new to open
    by mcdermj (at xenotropic) at 10:21 PM

    Good call. This is probably a control bound with Cocoa Bindings, so there's a setting in there somewhere to update the control continuously instead of at the en...
26 Click Through on Waterfall, Panadapter, and Bandscope was updated
  • mcdermj (at xenotropic)
    • State changed from new to open
    by mcdermj (at xenotropic) at 10:19 PM

    This behavior is because the main window isn't selected. I've been trying to think about things and decide what the "right" behavior is. If the behavior is goin...
* Fixed a problem with system audio ... was committed by mcdermj (at xenotropic) at 9:58 PM
Wednesday, March 09 2011
27 Continuous audio gain - feature was created
  • JohnJames
    JohnJames created the ticket at 4:56 AM

    Currently the audio gain is set at the end of the drag on the associated control. It would be nice to set it as the control is dragged so that you can stop at t...
26 Click Through on Waterfall, Panadapter, and Bandscope was created
  • JohnJames
    JohnJames created the ticket at 4:48 AM

    Changing from Receiver windows to set frequency in one of the above views requires two clicks.
    Adding the following to the views: -(BOOL)acceptsFirstMouse:(NSEv...